Description
GoPro’s HD Surf HERO is the world’s only 1080p HD on-board video and still photo camera. Professional quality 1080p / 960p / 720p HD resolutions record at 30 and 60 frames per second (60 fps in 720p). Easily mounts to any surfboard in seconds. So light, even top pros claim they don't notice the camera on their boards.
Features
GoPro’s HD Surf HERO is the world’s only 1080p HD on-board video and still photo camera. Professional quality 1080p / 960p / 720p HD resolutions record at 30 and 60 frames per second (60 fps in 720p). Easily mounts to any surfboard in seconds. So light, even top pros claim they don't notice the camera on their boards.
The HD Surf HERO can also shoot 5MP photos automatically every 2 seconds while you surf. With the simple press of the shutter button on the paddle out you can capture photos during your entire surf. Other photo modes include 5 / 10 / 30 / and 60 second time lapse as well as single shot, triple shot, and self timer modes.
The batteries last for over 2.5 hours of HD video or automatic photo taking, so you can document your entire surf with a single push of the shutter button on the paddle out.
The included adhesive base mounts in seconds and is proven in heavy surf from Hawaii to Tahiti, Southern Mexico to Northern California. Or you can install an FCS™ fin plug into the deck of your board and then use our patent pending camera mounting plug to allen key your HD Surf HERO into the FCS™ plug.
Lighten your load on your next trip and use the HD Surf HERO for your non-surf related photos and videos, too. Optional accessories make it easy to mount the camera on your wrist, bike, scooter, jet ski or helmet. Tow surfing? A chest harness is available for that, too.
Waterproof to 180’ / 60m and protected from rocks and other hazards thanks to its removable polycarbonate housing.
New Firmware Upgrade Now Available Check It Out HERE
Specifications
Camera Optics
- Lens Type: Fixed Focus (2ft/.6m – ∞), glass
- Aperture: f/2.8 (high performance in low-light situations)
- Angle of View: 170º ultra wide angle in WVGA, 720p, or 960p mode
- Angle of View: 127º wide angle in 1080p mode
Video
- HD Video Resolution Modes: (subject to change, pending final firmware release)
- 1080p = 1920x1080 pixels (16:9), 30 fps, 15 Mbit/s data rate
- 960p = 1280x960 pixels (4:3), 30 fps, 12 Mbit/s data rate
- 720p = 1280x720 pixels (16:9), 60 fps, 15 Mbit/s data rate
- 720p = 1280x720 pixels (16:9), 30 fps, 8 Mbit/s data rate
- WVGA = 848x480 pixels (16:9), 60 fps, 8 Mbit/s data rate
- Sensor Type: 1/2.5" HD CMOS, 2.2µm-sized pixels
- Light Sensitivity: Super low-light sensitivity (>1.4 V/lux-sec)
- Video Format: H.264 compression, saved as Windows- & Mac-compatible MPEG4 (.mp4) file
- Exposure Control: Auto with user selectable center weighted average and spot metering settings
- White Balance: Auto
Audio
- Microphone: Built-in, mono with AGC (automatic gain control)
- Audio Format: 48 kHz, AAC audio compression
Photo
- Resolution: 5 megapixel
- Capture Modes: Single shot, photo every 2, 5, 10, 30 or 60 secs.; 3 photo burst; self-timer
Storage
- Memory: SD card, up to 32GB capacity (SDHC)
- Average recording times (using 32GB SD card):
- 1080p (30 fps): 4h 21m
- 960p (30 fps): 5h 26m
- 720p (60 fps): 4h 21
- 720p (30 fps): 8h 09m
- WVGA (60 fps): 8h 09m
Camera Connectors & Cables
- PC Connection: USB 2.0 (data connection and battery charging)
- HDTV Out: HD NTSC & PAL (component cable incl.)
- Audio Out: Combo 2.5mm jack with stereo audio and composite video out
- PC Compatibility: Windows® XP (Service Pack 2 or later) or Vista; Mac OS® X 10.4.11 and later
Power & Battery
- Battery Type: Rechargeable 1100 mAh lithium-ion
- Battery Life: Approx. 2.5 hrs
- Charging: via USB to computer or optional power adapter
- Charge Time: 80% capacity after 1 hour with optional power adapter; or 2 hours with a computer’s USB port
Waterproof Camera Housing
- Depth Rating: Up to 180 feet / 60 meters
- Construction: Polycarbonate and stainless steel
- Hardware: Stainless steel
Size & Weight
- Dimensions (H x W x D): 1.6” x 2.4” x 1.2” (42mm x 60mm x 30mm)
- Weight: 3.3oz (94g) incl. battery, 5.9oz (167g) incl. housing
Items Included
- 1 HD HERO Camera (5 megapixel)
- 1 Rechargeable 1100 mAh Lithium-Ion Battery
- 1 Waterproof Quick-Release Housing (180’/60 m)
- 1 3M™ Adhesive Mounting Base
- 1 FCS™ Plug-Compatible Mount
- 1 Quick-Release Buckle
- 1 Leash
- 1 USB Cable
- 1 Component Video (HDTV) Cable
- 1 Composite Video + Audio Out Cable
- Warranty: One Year

Review
No information to display at this time...
Video
FAQ
- Question: What programs or software do i need to view and edit my movies
- Answer: There are several options, for just viewing your videos Quicktime is
recomended or you can use Windows Media Player or Movie Maker you will
need to download the
latest HD-capable version and also download a H.264 decoder to update
media player or movie maker. CoreCodec CoreAVC is one company that
offers a codec pack for h.264.
VLC media player also works well Download this free video media player that supports .mp4 h.264 files: http://www.videolan.org/vlc/
For all Windows users we highly recommend Pinnacle Studio HD editing software which is compatible with the MP4 files, this software has very user friendly interface and allows you to burn your video straight to DVD or upload to You Tube. Suitable for beginers and advanced users with many upgrades and plug ins available. You will find Pinnacle Studio 14 available in the accessory section of all our cameras or read more about it HERE . - Question: Are there any updates available for the camera
- Answer: Yes the latest Firmware update is now available and will provide the following features
One Button Mode; allows the camera to start recording as soon as the camera is turned on
Up / Upside Down; allows the camera to be mounted upside down with all videos and photos saved right way up
Live Video Out; displays live video straight to TV or hand held monitor ect
Live Video - On Screen Display; Display battery life, camera mode, and recording status icons on your live feed video signal
To see a full video guide of all the new features and to download the new upgrade click HERE
Accessories
-
FREE Express Postage on all Orders over $100.00
-
Pinnacle Studio HD Ultimate V15
Pinnacle Studio™ HD Ultimate v.15 makes it easy to edit like a pro with intuitive new features, ultra-fast performance, and a massive content collection. Quickly import videos and photos—then edit scenes and make HD movies with over 2,000 effects and other content. Add interest with sophisticated animated titles, and produce your soundtrack with immersive Dolby Digital 5.1 surround. Then export your projects to popular formats—or burn to DVD or Blu-ray—and share them with the world. The unique new Archive and Restore tool conveniently preserves your work.
- Quickly import photos and video
- Easily drag and drop videos, photos, titles, effects, and music
- Automatically create music to fit the length of your movie
- Choose from over 2,000 2D/3D effects, transitions and other content—including professional Red Giant plug-ins
- Preview in real time using the player window or full-screen mode
- Create an immersive experience with Dolby Digital® 5.1 sound
- Export to popular formats or burn to DVD or Blu-ray discs
-
Lexar Platinum SDHC Card 16GB Class 10
You’ve bought the best so use the best. The Lexar Class 10 cards have a high transfer rate for fast copying and downloading and is the Ideal SD Card for your Helmet Camera.
.Transfer speed of up to 100x* (15MB/s**)
.Designed for fast-action photography and HD video -
MaxFlash 8gb SDHC Card / Class 6
You’ve bought the best so use the best. The MaxFlash cards have a high transfer rate for fast copying and downloading and is the Ideal SD Card for your Helmet Camera.
-
MaxFlash 32gb SDHC Card / Class 6
You’ve bought the best so use the best. The MaxFlash cards have a high transfer rate for fast copying and downloading and is the Ideal SD Card for your Helmet Camera.
-
GoPro LCD BacPac
The LCD BacPac is a detachable LCD screen for your 1080p HD HERO camera. As a removable accessory, the LCD BacPac keeps your camera as small and light as possible, yet provides the convenience of an LCD screen when attached.


NOTE: May require a Firmware Upgrade NOT compatible with the HD HERO 960 camera.
-
GoPro Battery BacPac
The Battery BacPac works as both a charger for your spare HD HERO batteries and plugs into the back of the 1080p HD HERO camera to nearly double record times. Perfect for long duration time-lapse photo sessions, endurance motorsports racing or any application where you need up to 2X* the battery life.
NOTE: may require firmware upgrade. The Battery BacPac is NOT compatible with the HD HERO 960.


-
GoPro Curved Adhesive Mounts (5x Pack)
These are the same mounts already included with most HERO and HD HERO cameras. This package includes five curved, 3M™ adhesive mounts. 3M's innovative VHB 4991 adhesive backing ensures the mounts stay put, but can be cleanly removed when heat (eg. from a hairdryer) is applied.
-
GoPro Flat Adhesive Mounts (5x Pack)
These are the same mounts already included with most HERO and HD HERO cameras. This package includes five flat, 3M™ adhesive mounts. 3M's innovative VHB 4991 adhesive backing ensures the mounts stay put, but can be cleanly removed when heat (eg. from a hairdryer) is applied.
-
GoPro Floaty BackDoor
Easy to spot flotation backdoor lets your HD HERO camera float in water. Industrial strength 3M adhesive backing attaches the floaty directly to the HD HERO waterhousing backdoor. A spare HD HERO waterhousing backdoor is included.Please note, the Floaty will not support the weight of the suction cup mount. The suction cup mount is not recommended for high impact water sports.
-
Lens Cap Cover for the GoPro Camera
A lens cap for the HD Hero itself. Now you can protect that delicate and unrepairable camera lens. Plastic, fits snug.
Not for use on the GoPro Underwater Housing. -
GoPro HD Rechargeable Li-Ion Battery
Lithium-ion rechargeable battery as a spare or a replacement in your HD HERO camera. Provides approx. 2.5hrs of record.
NOTE: This battery is for use in HD HERO cameras only -
GoPro 3D Housing
"Out of Stock"
The 3D HERO System allows you to combine two 1080p HD HERO cameras into a single housing to record 3D video and photos while simultaneously recording in 2D. A synchronization cable plugs into the rear HERO Port on both cameras to join them together, enabling both cameras to record video and photos in perfect synchronization. This is a requirement for professional quality 3D and is available only from GoPro.
The included 3D editing software—GoPro Cineform Studio—makes it easy to convert your 3D HERO System footage into viewable 3D files you can watch on your computer, online at sites like YouTube, and on your 2D or 3DTV at home.
Features:
- Mounting System is compatible with all GoPro accessories
- 3D waterproof housing is rated 180’/60m deep
- Record 3D and 2D video and photo files simultaneously
- Includes FREE easy-to-use 3D editing software—GoPro CineForm Studio
What’s Included:
- 3D Waterproof Housing
- 3D Waterproof Door + Skeleton Door
- 3D Hero Sync Cable
- 3D Anaglyph Glasses (3 pairs)
- Helmet Front Mount
- 2 Flat + 2 Curved Adhesive Mounts
- Assorted Mounting Hardware
- FREE GoPro CineForm Studio Software
Note: A firmware upgrade is required for your 1080p HD HERO cameras. Cameras are not included.
The 3D HERO System is NOT compatible with the HD HERO 960 or standard definition cameras.



-
GoPro HD Wrist Housing
Allows you to wear your HD HERO camera on your wrist like a watch. Camera pivots upright to shoot videos or photos, but stays securely attached to your wrist even in this position. Fits over ski gloves and jackets, too.
The water housing is waterproof to 180'/60 meters.
The housing can also be strapped to gear such as kayak paddles and the leading edge of kitesurfing kites. This allows the kitesurfer to film their entire session looking down from above, as though they had a private helicopter camera crew following them while they surf.
The HD Wrist Housing has an adjustable neoprene strap that fits a range of sizes from a child's wrist to fitting over the ski jacket sleeve of an adult.
NOT compatible with older, standard definition HERO Cameras.
What's Included:
- 1 HD Wrist Housing
- 1 Neoprene and Velcro® Wrist Strap (One Size Fits All)


-
GoPro Front Helmet Mount
Allows for low-profile positioning of your camera on the front of your helmet, like a headlamp. Also extends out in front of the helmet so you can turn the camera back on yourself for self-portrait videos and photos.
Camera NOT included.
What’s Included:
- 1 Helmet Front Mount
- Warranty: One Year
-
GoPro Neutral Density / Polarizer Filter
This little gem needs some explaining. Ever seen a GoPro video where the tyres are going backwards or where you see RC/helicopter blades as if they are standing still? Wouldn't it be nice to blur them? All you have to do is cut out some of the light to the lens and you'll get nice realistic blurred propellers, tyres, roads, etc. to give you a natural feel. This filter simply goes between the HD Hero camera lens and the underwater housing lens. But wait, there's more. It's also a polarizing filter making the sky deeper blue, removing water reflections and giving more vibrant colors all around. -
GoPro Lens Replacement Kit
Kit comes with two replacements for the wide-angle glass lens covers which used on all wide-angle HERO housings.
Compatible with all Wide Angle GoPro cameras...
What's Included:
- 2 Wide-Angle, Glass Lens Covers
- 2 Rubber O-Rings
- 6 Screws
- 1 Screwdriver
-
GoPro Vented Helmet Mount
Designed to tie in through the vents of any vented helmet, camera attaches with the use of the quick release buckle, ideal for mountain biking, kayaking ect. This mount also comes with the GoPro Helmet Hero -
GoPro Anti Fog Inserts
Prevent your camera's housing from fogging, even in cold temperatures/humid environments. Great value and performance: includes 3 sets of anti-fog inserts. Each set lasts 4-5 uses and can be dried in an oven (3 minutes) and used again.
-
Kite Hero Line Mount
The perfect mount for kite surfers and kite sports, allows optimal camera set up allowing a unique point of view. Suitable for 4 and 5 line rigs
Made from light weight nylon designed for use with all GoPro cameras (except the Wrist Hero). Capable of mounting other brands of cameras using the standard tap hole.
-
Surf Hero Expansion Kit
Includes all of the mounting accessories from the Surf HERO camera, minus the water proof housing and camera. Perfect for mounting your GoPro HERO onto a surfboard. The Surf HERO extension kit includes two, removable mounting options:
- A stick-on baseplate that takes a couple of minutes to set up and go
- An FCS™ compatible plug mounting system that allows you to allen-screw your camera into the deck of your board when you install an FCS™ center fin plug into the deck of your board. Easily done by any ding repairer or shaper.
-
Universal Wall Charger
Wall Charger is a universal charger that you can use anywhere around the world. Slip on the adaptor that suits your country and connect your GoPro HD to the USB connection to charge your battery.
2hour Charge Time
-
Head Harness
Build up your arsenal of camera mounts. The head harness is ideal for those who don’t wear a helmet, but still want to head mount their GoPro. Fully adjustable silicone lined elastic straps ensure a secure, non-slip mount.

-
Gun Mount for GoPro HD Hero
This is a gun mount for the GoPro HD Hero camera. Can be used with airsoft, BB gun, paint ball, basically any gun that has a Picatinny / Weaver rail.
Can be used with GoPro pivot arms (not included) in order to get the exact angle you want.
Camera can face the user or face outwards towards the barrel.
Note: This is for guns with little or moderate recoil. Using on a gun with substancial recoil will cause the pivot points to slip no matter how much you tighten the thumbscrew.
-
Carbon Fiber Tube 3 inch for GoPro
"Currently Out Of Stock"
This is a 3" carbon fiber tube (overall length is 4") for use with the GoPro Front Helmet Mount.
It extends the camera out from the camera so you can see more of your surroundings instead of just your forehead. Now updated with pop rivets for extra twisting strength. NOT for underwater use because the aluminum ends would corrode and the tube is sealed making it bouyant.Can also be used with other GoPro mounts that have little or no vibration.
Helmet front mount and camera/housing not included.

-
GoPro HD Skeleton Housing
Features open sides that allow for easy plugging in of cables for live feed video out of the camera, charging the camera with a USB cable while recording video or photos, significant cooling when running the camera in extremely hot environments where camera cooling is a concern, and enhanced sound recording when used in non-windy locations like a race car, concert, jam session, etc.
Note Your HD HERO camera is NOT waterproof when used with the HD Skeleton Housing
-
The Chesty
Want to capture a really unique point of view? The chest harness combined with the 170 wide angle GoPro provides a realistic view of your chosen sport. Show the world how and what you get up to with this totally unique camera mounting system. Make your GoPro so much more than just a helmet camera.
-
Ride Hero
The Ride HERO is a seat post and handlebar tube clamp for mounting your quick-release GoPro camera on to tubes/frames ranging from 1.9cm - 3.5cm in diameter. You can also clamp to chainstays, small roll bars, bolt-heads, windsurfing and kite surfing booms/control bars, or anything else that is in the size range above. Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.


-
Roll Bar Mount
Roll bar / tube clamp for mounting your quick-release GoPro camera on to tubes / frames ranging from 35mm to 65mm diameter. Perfect for clamping your camera to Roll bars, go karts, bike frames, bumper bars, ski / surfboard racks, or anything else that is in the size range above. Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.


-
GoPro HD Replacement Housing
Replacement quick-release housing for all GoPro HD cameras. For use with newer, HD HERO cameras only. Not compatible with Standard Definition GoPro Wide or Narrow angle lens cameras.
What's Included:
* 1 Shockproof/Waterproof Quick-Release Housing
* 1 Horizontal Surface Quick-Release Buckle
-
Grab Bag of Mounts
The ideal kit for mounting your GoPro to helmets (and almost any surface) using the 3M adhesive base plates.
What's Included:
- 1 Flat, 3M™ Adhesive Mount
- 1 Curved, 3M™ Adhesive Mount
- 1 Horizontal Surface Quick-Release Buckle
- 1 Vertical Surface J-Hook Buckle
- 1 Thumb Knob with Nut and Bolt
- 1 Pivot Arm Assembly
- 1 Quick-Release/Vibration Plug
- 1 Leash Tether

-
GoPro Tripod Mount
Tripod mount for attaching your quick-release GoPro camera to a standard tripod or any quarter inch UNC thread


