Liquid Image Firmware Update
-
Liquid Image Firmware Update
last modified - 6th Oct 2011 @ 10:20
Liquid Image Model 335 & 365 Firmware Update 02/18/11
Upload instructions:
This is a Firmware update (2/18/11) for the Summit Series Snow Goggle model 335 and Impact Series MX Goggle model 365. This firmware will fix small charging issues (turns off when done) as well as increase the bitrate from 4Mbps to 8Mbps for smoother video. High action will be less blurry. But, your file sizes will be larger.
It is very easy to upload new firmware:
1) you will to see the file called “firmware.bin" (see below)
2) Connect the Video Goggle to the Computer and open the drive
3) Move the firmware.bin file onto the drive outside of the DIM and MISC folders on the drive of the Video Goggle
• Alternatively, you can do the above by just putting the MicroSD card into the adapter and sticking it into the computer (which is generally faster if you are going to update more than one cameras with the same MicroSD card).
4) Disconnect the USB cable from the Video Goggle
5) Hold down the upper Shutter Button and Press and hold the lower Power Button. Once you hear the Beep sound, release both buttons. The word UP will show in the LCD screen and will shut off after 3-5 seconds. You are now ready to use the new firmware and your videos will be even better than before.
